Detailed Product Description

Material:	Stainless Steel SS304 And 316L	Port Size:	1/2" - 4"; DN15-DN100
Connection Ends:	Tri-Clamp, Thread, Butt Weld	Sealing Mode:	Ball Core Completely Encapsulated
Medium:	Lever.Pneumatic Actuator,Electric Actuator	Media:	Dairy, Food, Beer, Beverage, Pharmacy, Cosmetic, Water Etc
Temperature:	-10°C To +120°C
High Light:	hygienic ball valve , ss ball valve

Product Name:	Sanitary SS304,SS316,CF8M Tri-Clamp Ball Valves,1000WOG,ISO5211 Mounting pad,lever
Ball Valve Type:	Direct way ball valve,butterfly type ball valve,3pc ball valve
Size:	1/2”-4”,DN15-DN100
Connection End:	Welding,Tri-clamped,threaded,Flange
Standard:	3A,DIN,SMS,ISO/IDF,RJT
Gasket:	Silicone,EPDM,PTFE
Operation Way:	Manual,Pneumatic and Electric actuator
Control Head:	C-TOP controller,sensor
Max Temperature:	10bar
Working Temperature:	-10°C to +120°C
Surface Polishing:	Ra≤0.8um
Packing Method:	Bubble pack for each valve. Outside packing are carton or plywood cases. Or as per the request of customers.
Shipment Way:	By express,by air or by sea,as customer request
Delivery Detail:	Usually 10-15days after order confirmed
Application Scope:	Dairy, food, beer, beverage, pharmacy, cosmetic, water etc

ChuangXing 3-piece sanitary ball valve with ISO direct mounting pad is designed for food biological, pharmaceutics or similar industries. The cavity filled seat option will help not to remain the media in the body cavity to keep from spoiling or mixing. Cavity filler seats will also help to clean the valve port easily.

The options on end types can be Tri-Clamp, Tube weld end, Extended tube weld end. Different material of soft kits will be applicable for different working circumstance.

ChuangXing offer pneumatic/ electric actuator and limit switch box/ solenoid valve/ modulating controller....assembling without further charge.

Features:

The sanitary three pieces encapsulated ball valve consists of three detachable parts for easy assembly and disassembly
Much more convenient to maintain and repair when compared to one piece and two pieces types
Durable even under high pressures
Very low flow resistance due to the smart design of the sanitary valve
Special self-cleaning sealing material
Wide range of size, working pressure, temperature, connection type, standards, etc.

Advantages:

1.Small fluid resistance, the same length of pipe section have equal resistance coefficient

2.Simple construction,small volume,light weight.

3.Easy operation,open and close quickly,from fully open to fully close just need rotate 90° for easy remote control

4.convenient maintenance,ball valve has simple construction,the sealing is usually moveable,that easy to disassemble and replace.

5.When fully open or fully close,the sealing surface of sphere and valve seat is isolated from medium,It will not cause the valve sealing surface erosion when the medium passing.

Note:piece type ball valve can't adjustable.valve is normally open or normally closed.

The design of the high platform is completely in accordance with standard ISO5211 and DIN3337, because ISO5211 specifies the dimensions of the mounting pad and the dimensions of the square axis of the actuator, DIN3337 defines the 45° direction for the square axis of the actuator

Manual and pneumatic replacement

Manual change to pneumatic,just need take off the handle,Install pneumatic head,It's easy to operate.

Design Advantages:

1. Three detachable valve body parts as showed in below pictures. This design brings much more convenience of disassembly any time compared to common type ball valves

Sanitary Manual Ball Valve , Three Piece Encapsulated Hygienic Ball Valves

2. The encapsulated bore core structure helps achieve non-retention, no leakage, no dead leg area. In below picture, the left one is full port package type, and the right is standard sealing type.

Sanitary Manual Ball Valve , Three Piece Encapsulated Hygienic Ball Valves